Replacement flap – with included magnet – for the Hakuna Pets Deluxe Aluminium Pet Door.
🔔 Which flap version should I get?
Purchase From Our Website |
Purchase Outside Our Website |
|
From Nov 2023 | v2 | v1 or v2 - read below |
Jan 2018 - Nov 2023 | v1 or v2 - read below | v1 or v2 - read below |
Before 2018 | contact us | contact us |
-
v1: has two small discreet screws located on the left and right edges of the flap lip
- v2: has much larger silver bolts that go directly through the flap itself
Size | v1 Flap |
v2 Flap |
Small | 6.9" x 9.5" | 6.7" x 9.1" |
Medium | 8.9" x 12.6" | 8.9" x 12" |
Large | 11" x 16.1" | 11" x 15.9" |
Extra Large | 14.6" x 23.4" | 14.6" x 23" |
*Replacement flap only, pet door not included.
Measurements may vary 1mm - 5mm, if you are unsure with your flap measurements, please reach out to customer support.
Draft and weather-resistant: Fitted with a thick brush seal to block drafts. Strong Magnet keeps the flap centred after each use.
Durable Construction: Clear flexible PVC flap.
Specifications
Model | Deluxe Aluminium Pet Door Replacement Flap |
SKU |
Small v1 - #2820 Small v2 - #5016 Medium v1 - #2822 Medium v2 - #5017 Large v1 - #2823 Large v2 - #5018 Extra Large v1- #2824 Extra Large v2 - #5019 |
Parts Included |
v1 - Replacement Flap (1), Rubber Shim (1) v2 - Replacement Flap (1) |
Materials | PVC, Magnet |
Installation
v1 Installation
- Remove the screws at the top of the frame securing the flap
- Using a flat head screwdriver, pry open the metal strip/bar that clasps the flap in place
- Position new flap in frame, push down the strip/bar to clasp the flap in place and secure with screws
- Screw the pet door frame back in place
Video Guide
v2 Installation
- Remove screws on flap holder
- Remove flap
- Replace flap and align
- Adjust flap to desired height and tighten screws
TIP: For less noise or magnet strength, adjust the flap to a higher position.
Video Guide
You may also like
Recently viewed